|
Post by Andrew on Oct 23, 2008 10:27:18 GMT
Ok, I have lots of odd Pivot parts and bolts knocking about here.
Don't know where they all came from, but just incase anybody needs a specific part instead of a whole rebuild kit........ maybe you knackered a bolt or something.
575 04-07 (maybe some other bikes) - Main Pivot pin, bolt and endcap. Pin is 20mm x 50mm. Its good to change this if your bearings seized up before you changed them.
575 and other - shock mounting bolt - shaft on pin is 25mm. This is used on AS-R- AS-X - 575 etc. Bolt and Pin with 2 washers.
575 Shock/Dogbone/swing arm bolt and Pivot pin in 2 black washers & 2 washers. Use this if you have worn out the pin in the end of your shock. Pin shaft length is 40mm. (this is the long one)
any questions just ask.
Andrew
|
|
|
Post by sithlord on Oct 25, 2008 23:55:22 GMT
Hi Andrew , Great Site BTW.. Keep up the Good work .. I have a 07 575 , which I may decide to keep , so the above spares may be handy to have in the workshop do you wanna PM me or leave the price for the above here fella.. Interested in all of these, if they will fit my 07 575 thanks Si...
|
|
fagus
Call me Mr YETI
Posts: 66
|
Post by fagus on Oct 26, 2008 8:28:32 GMT
Think it might be better if Andrew keeps hold of them until someone needs them, rather than have them sitting unused in a workshop.
|
|
|
Post by Andrew on Oct 27, 2008 6:46:44 GMT
I need to get rid of this stuff! Much as I'd like to sit on it until there is a disaster, Its all cost me money once, so I'd like to turn these bolts into a bit of cash!
OK, Some are on ebay now, but Yetifans get a lower price.
Prices----
Main pivot pin and bolts £14 posted. Shock to frame bolt - £4.50 Dogbone to frame mount £4.50 long bolt for dogbone/shock/swingarm(1 only) inc 2 black washer £5.00
This stuff is popular, so email me to avoid missing out.
Andrew
|
|
|
Post by madcowkev on Oct 27, 2008 13:53:22 GMT
Andrew - do you have any ASR linkage bearings?
|
|
|
Post by Andrew on Oct 27, 2008 15:12:52 GMT
Hi, the only way to get the bearings is in the bearing part kit.
Sorry!
Andrew
|
|