|
Post by stormchaser on May 21, 2008 12:20:49 GMT
Hi guys,
I am a proud owner of '08 575..
I suspect my cabling may be ran incorrectly and hope you can share how yours is ran...
My front d cable is ran from my left shifter over to right of my head tube and straight down the right side of the down tube, it then awkwardly go under the BB and joins to the front d at an angle..
It this correct?
Or should it go along the left of the down tube and under the BB allowing a straight up connection to the front D?
Please advise... Thanks : )
From Singapore...
|
|
|
Post by theswede on May 21, 2008 21:28:17 GMT
That sounds right but make sure you have the cable going through the plastic guide eyelet nearest to the drive side of the bb.
|
|
|
Post by perttime on May 22, 2008 12:28:52 GMT
|
|
|
Post by stormchaser on May 24, 2008 10:07:01 GMT
Hey... Thanks. Didn't know a manual is available.. Will look in there..
|
|