|
Post by seahorse on Feb 25, 2008 12:00:09 GMT
Hi,
I am building up my new ASR alloy frame this week!
I was wondering if anybody had any tips on shock pressure for the RP23 shock. The recommended pressures on the Yeti website I notice are for the RP3 shock, will these figures still work for the newer shock?
Just for reference I am around 73 kg with my camelback etc. – About 160lbs ish!
Cheers Ben
|
|
lukew
Call me Mr YETI
Posts: 46
|
Post by lukew on Feb 25, 2008 14:00:11 GMT
try around 150-160psi with rebound set toward the slow side
|
|
romas
Call me Mr YETI
Posts: 52
|
Post by romas on Feb 26, 2008 15:56:54 GMT
Hi! for me with my 81kg, 150psi on the shox pump and 145psi after taking of the pump... perfect! I use all the travel of the shox!
Bye
|
|