alex6
New Questions.......
Posts: 13
|
Post by alex6 on Feb 5, 2008 23:43:23 GMT
the last piece in my dh9 jigsaw is fitting the headtube badge. what is the best and neatest method?
|
|
|
Post by Andrew on Feb 6, 2008 7:19:47 GMT
do you have the 2 little fitting pins?
And there is 2 holes in the headtube already?
|
|
alex6
New Questions.......
Posts: 13
|
Post by alex6 on Feb 6, 2008 12:35:27 GMT
i do not have the fitting pins and i am not sure about the holes in the head tube as there is currently a sticker on there. i will look tonight for holes.
|
|
|
Post by Andrew on Feb 6, 2008 16:22:38 GMT
OK, so you will need to DRILL 2 holes in your head tube, and then you need to fit the headbadge with 2 small rivits, or the special fixing pins, but if the holes are too big, it will fall off.
I am unsure of the correct hole size, but its got to be between 0.5-1.0 mm as the pins are tiny little buggers.
They come with the head badges.
Andrew
|
|
alex6
New Questions.......
Posts: 13
|
Post by alex6 on Feb 7, 2008 8:05:26 GMT
thanks for your help andrew. i fixed it last night buy pinching 2 screws from an old laptop which fitted. looks ace! and my ti spring came too ;D rinsing it out at net weekend
|
|