'08 575 cabling

[stormchaser]

Hi guys,

I am a proud owner of '08 575..

I suspect my cabling may be ran incorrectly and hope you can share how yours is ran...

My front d cable is ran from my left shifter over to right of my head tube and straight down the right side of the down tube, it then awkwardly go under the BB and joins to the front d at an angle..

It this correct?

Or should it go along the left of the down tube and under the BB allowing a straight up connection to the front D?

Please advise... Thanks : )

From Singapore..

[Andrew]

HI, Ran from the shifter, to the right side of the head tube, then to the other hold on the black plastic under the BB shell.

I think you might need to unscrew the black guide and turn it round, I will have a look tomorrow.

Andrew

[stormchaser]

Hi Andrew,

Have u had a chance to take a look at your cabling?

Thanks..

[hadge]

Have a look at this pic - please email me and I will send you some close ups tomorrow ok

Right shifter cable goes into the left side and vice-versa

[stormchaser]

Hi Hadge,

I realize that my rear d cable is also wrong as it is now running below the bb shell with my front d cable!!

Are u able to send me a pic of the bottom of your bb shell with your bike upside down?

I can then figure out the proper way it is ran... Thanks.

[fagus]

www.yeticycles.com/11_Support/Media/07OwnersManual575.pdf

Have a look at page 10.