|
|
Post by norcaldave on Jan 31, 2008 17:15:01 GMT
Help.... I need to set up rear brakes on a straight 6. I need an adapter or a calpier to fit the stock hole pattern.
|
|
|
|
Post by Andrew on Feb 1, 2008 19:45:10 GMT
Hi, It depends what mount you have, there are 2 sorts,. IS (or Hope no3) from the old days, this was on some Lawwill 4s', I am unsure what the 6 has, I imagine its a 22mm Hayes mount? The DH-8 has the 21mm mount and the DH-9 mostly have the newer IS mount. Your options are few, and are limited if its the 22 (2 holes close together), you either need to get a 22mm to IS mount, these are almost impossible, or try and find some old HAYES 21mm mount brakes, also very hard. Ebay could be your best option. chain reaction has this, could be made to fit,..  From Hayes at £24.99 and this from hope at £8.99  If these fit or not, I can't be sure. I know there is limited room inside a DH6 for this type of bracket. |
|
|
|
Post by kitkoopa on May 26, 2008 9:23:32 GMT
And don`t you know the standard on Lawwill 4 98`? It has 43 mm (center to center) on its rear floating mount. I despaired trying to get some adaptor...
|
|
|
|
Post by Andrew on May 26, 2008 13:51:38 GMT
The Lawwill 4 needs an old type hope no 3 or 5 caliper I think.
Depends what size rotor.
|
|
