Post by bertroot on Mar 19, 2016 10:46:51 GMT
Always fancied trying a Yeti but not had the opportunity to get hold of one until now.
Decided to go red and black and use as much Hope stuff as possible as it has always been good on my other bikes. I sold my last bike to fund the parts buy for this whereas usually I move the parts off my last bike onto whatever comes next but wanted a fresh start this time. Not really Yeti colours but I do like a bit of black and red.
Really like the bike. Shorter in the cockpit than my last bike which was an Orange Five in a medium but the shortness is good. Rides nicely and absorbs bumps well after a bit of adjustment on the rear shock. There is a creak somewhere but cannot nail the damn thing down but at least I know 50% of the bike has been greased twice trying to track it down...
This was it on unwrapping -

Some parts -


Some build shots -


And some complete shots -




Parts list is as follows -
Frame: Yeti SB75 Small
Shock: Cane Creek CCDB Air CS 190x50
Fork: BOS Deville
Headset: Hope internal
Stem: Hope AM/FR Stem 50mm 0 Rise
Handlebar: RaceFace Sixc Carbon Riser - 765mm
Grips: LizardSkins Peaty
Brakes: Hope Tech 3 E4
Brake Pads: Hope Sintered
Brake Hoses: Hope Braided
Shifter: SRAM X0
Rear Derailleur: SRAM X0 with clutch
Derailleur Cables: Jagwire Ripcord Carbon Silver
Cassette: XT 10 speed 11 - 36 with 40t Hope T Rex expander
Chain: KMC X10SL
Cranks: Hope 68/73mm Crankset
Chainrings: Hope Retainer 34t
Chainring bolts: Stronglight
Bottom Bracket: Hope 30mm External
Pedals: DMR Vault Brendog
Hub Skewers: Front 15mm BOS, Rear Shimano 12mm
Rims: )
Hubs: ) - Hope Tech Enduro Pro 4 EVO
Spokes: )
Tyres: Schwalbe Nobby Nic Evo Snakeskin TLR
Tubes: Schwalbe
Saddle: Selle Italia Flite Gel Flow
Seatpost: Rockshox Reverb 125mm length 380mm
Seatpost Binder: Hope Dropper Clamp
Decided to go red and black and use as much Hope stuff as possible as it has always been good on my other bikes. I sold my last bike to fund the parts buy for this whereas usually I move the parts off my last bike onto whatever comes next but wanted a fresh start this time. Not really Yeti colours but I do like a bit of black and red.
Really like the bike. Shorter in the cockpit than my last bike which was an Orange Five in a medium but the shortness is good. Rides nicely and absorbs bumps well after a bit of adjustment on the rear shock. There is a creak somewhere but cannot nail the damn thing down but at least I know 50% of the bike has been greased twice trying to track it down...
This was it on unwrapping -

Some parts -


Some build shots -


And some complete shots -




Parts list is as follows -
Frame: Yeti SB75 Small
Shock: Cane Creek CCDB Air CS 190x50
Fork: BOS Deville
Headset: Hope internal
Stem: Hope AM/FR Stem 50mm 0 Rise
Handlebar: RaceFace Sixc Carbon Riser - 765mm
Grips: LizardSkins Peaty
Brakes: Hope Tech 3 E4
Brake Pads: Hope Sintered
Brake Hoses: Hope Braided
Shifter: SRAM X0
Rear Derailleur: SRAM X0 with clutch
Derailleur Cables: Jagwire Ripcord Carbon Silver
Cassette: XT 10 speed 11 - 36 with 40t Hope T Rex expander
Chain: KMC X10SL
Cranks: Hope 68/73mm Crankset
Chainrings: Hope Retainer 34t
Chainring bolts: Stronglight
Bottom Bracket: Hope 30mm External
Pedals: DMR Vault Brendog
Hub Skewers: Front 15mm BOS, Rear Shimano 12mm
Rims: )
Hubs: ) - Hope Tech Enduro Pro 4 EVO
Spokes: )
Tyres: Schwalbe Nobby Nic Evo Snakeskin TLR
Tubes: Schwalbe
Saddle: Selle Italia Flite Gel Flow
Seatpost: Rockshox Reverb 125mm length 380mm
Seatpost Binder: Hope Dropper Clamp