|
Post by kaosbabylon on Aug 13, 2017 23:11:40 GMT
Hi, just wondering if anyone has any ideas about this. When I look down my frame From behind holding it upright with the bike level. The swing arm seems to be off to one side very slightly. I may be thinking ott but there is a tiny difference between the gap in the seat tube and each side of the top of the stay. Maybe I'm being anal anyone any ideas what might cause this. Thanks
|
|
|
Post by Andrew on Aug 14, 2017 15:44:16 GMT
Try loosening all bolts, removing shock , move suspension up and down and re tighten.
Check the bearings are all seated.
Does rear tyre line up with frame?
|
|
|
Post by kaosbabylon on Aug 14, 2017 18:38:36 GMT
When I look down the frame from the bar the seat seems very much in line with the wheel. I have loosened all the bolts etc and I think the problem seems to be the dog link.
The problem is the bearings seem seated ok to the naked eye so I'm not sure what the problem might be ? It's only about 1mm out but it's noticeable
Any ideas would be great. Thanks
|
|