|
Post by yelreppa on Feb 22, 2015 10:59:22 GMT
Have 07 575 which by the looks of the movement in the dogbone the bearings are knackered! Can I just replace the worn bearings in that area as I need the cost to be as little as I've just serviced the forks and also the headset bearings need replacing ride a lot u see. Can I replace the dogbone bearings without replacing the tube that they sit in? What the life of the bearings once replaced? Always clean bike after ride. Thanks Mark
|
|
|
Post by Andrew on Feb 22, 2015 13:53:22 GMT
Yes you can buy just a bearing kit.
The dogbone is reusable.
Bearing life depends where you ride, how much, when you clean it, what with, how you store it etc.
Where I ride it's possible to wear bearings out in a few months, but a good average time on a 576 is 2 years
|
|
|
Post by Andrew on Feb 22, 2015 13:53:33 GMT
575 typo
|
|
|
Post by yelreppa on Feb 23, 2015 19:17:29 GMT
Cheers..I ride Peaks and around Rivington..I'll be taking it to rebound in Horwich tomorrow so can get back out as soon as possible. Can you tell me is my steer 1/8th 36.5 as am looking at getting a new stem bike is 2007 with revelations 140mm forks.
|
|
|
Post by Andrew on Feb 23, 2015 19:35:33 GMT
Yes forks are 1 1/8th not tapered.
|
|